Bakul siasatan ( 0 )
Butiran syarikat
  • Dongguan Longwang Hardware Co.,Ltd

  •  [Guangdong,China]
  • Jenis perniagaan:pengeluar , Syarikat perdagangan
  • Main Mark: Americas , Eropah Timur , Eropah , utara Eropah , Eropah Barat
  • pengeksport:41% - 50%
  • CERT:ISO9001, TUV
Dongguan Longwang Hardware Co.,Ltd

Dongguan Longwang Hardware Co.,Ltd

Title
  • Title
  • Semua
Rumah > Maklumat Industri > Rules for safe operation of lathe technology

Maklumat Industri

Rules for safe operation of lathe technology

2019-01-07 10:40:35

(1) lubricate the machine tool as required before work, check whether all the handles are in place, and start the slow car test run for five minutes to make sure everything is normal before operation.
(2) chuck chuck to be on the fast, boot wrench can not stay in the chuck or chuck head.
(3) the workpiece and tool clamping should be firm, the tool bar should not extend too long (except boring); Turn the small tool holder to stop, to prevent tool collision chuck, workpiece or cut hand.
(4) when the workpiece is running, the operator shall not stand directly on the workpiece without relying on the lathe or stepping on the oil pan.
(5) high speed cutting, should use chip breaker and baffle screen.
(6) high speed anti-brake is prohibited, and the parking and backing up should be smooth.
(7) remove iron filings with a brush or special hook.
(8) to smooth the workpiece with a file, the right hand must be in front, the left hand behind; With emery cloth polishing workpiece, to use "hand clamp" and other tools, in order to prevent wringing.
(9) all labor, quantity and cutting tools should be placed in a safe place nearby in order.
(10) if the lathe does not stop properly, it is forbidden to take the workpiece or measure the workpiece on the head.
(11) when the lathe is working, it is forbidden to open or remove the protective device.
(12) close to the end of the work, should clean and wipe the test bed, and the tailstock and sliding board box back to the right end of the bed.
You may also be interested in :
Vr Remote Control Aluminum Enclosure Lubricating Oil Pump Machining Pom Parts

Related Products

Related Industry Information

  • The kind of hardware
  • 1, lock Exterior door lock, handle lock, drawer lock, ball lock, glass window lock, electronic lock, chain lock, anti-theft lock, bathroom lock, padlock, number lock, lock body, lock core. 2, handle...

    2019-01-07
  • Rules for safe operation of lathe technology
  • (1) lubricate the machine tool as required before work, check whether all the handles are in place, and start the slow car test run for five minutes to make sure everything is normal before...

    2019-01-07
  • CNC innovation in Mobile Phone Manufacturing
  • Some time ago, the old section wrote an article on "CPC processing low-cost orders, harming oneself, hurting colleagues, and pitting customers! Please observe the reserve price" article on the old...

    2018-06-28
  • Why choose CNC machining?
  • CNC machining technology is the basic technology of modern advanced machinery manufacturing industry. CNC machining also shows great advantages in modern production. 1. High efficiency in numerical...

    2018-07-02
    Berkomunikasi dengan pembekal?Pembekal
    Elena Tan Ms. Elena Tan
    Apa yang boleh saya lakukan untuk anda?
    Hubungi pembekal